Clothing Manufacturer_Clothing Factory clothing manufacturers News Correct cleaning and maintenance methods for fire retardant work clothes

Correct cleaning and maintenance methods for fire retardant work clothes



Correct cleaning and maintenance methods for fire-resistant and flame-retardant work clothes Fire-proof and fire-proof work clothes are widely used in our current industry It is in…

Correct cleaning and maintenance methods for fire-resistant and flame-retardant work clothes

Fire-proof and fire-proof work clothes are widely used in our current industry It is indispensable. It protects the personal safety of the staff. However, the cleaning method of this special fire-proof clothing is much more particular than the way we usually clean clothing. Now let us take a look at how to clean fire-proof clothing. Pack.

First of all, fireproof work clothes are divided into two styles: one is The upper and lower styles are separate, and the other is the one-piece style. Since special workwear is more difficult to manufacture than general workwear and has higher technical requirements, the cleaning methods are also very different. If you do not pay attention to these details, it is likely to reduce the life of fireproof and fireproof workwear, and even affect the staff at critical moments. personal safety.

Cleaning method: The breaking strength of the fabric of fire-proof work clothes is greater than 450N before washing and greater than 400N after washing. The shrinkage rate of his fabric is less than 2.5%. In order to avoid dust contamination, cleaning of fire-proof work clothes should be completed indoors. In order to be safer and more beautiful, when cleaning, the water temperature should be below 30 degrees, add 1g of neutral fat soap or enzyme-free detergent per kilogram of clothing, the liquor ratio should not be greater than 1:40, and use light cleaning methods. After cleaning, it should be dried in the sun, or dried naturally and then ironed at 150 degrees for 2 minutes. It can also be used after ironing at 150 degrees for 4 minutes. When not in use, it should be stored in a dry and ventilated place to avoid mechanical or chemical damage, and should not be placed together with corrosive items.

AAAFGHTYHCGER


Disclaimer:

Disclaimer: Some of the texts, pictures, audios, and videos of some articles published on this site are from the Internet and do not represent the views of this site. The copyrights belong to the original authors. If you find that the information reproduced on this website infringes upon your rights, please contact us and we will change or delete it as soon as possible.

AA

This article is from the Internet, does not represent 【https://www.clothing-manufacturers.net/】 position, reproduced please specify the source.https://www.clothing-manufacturers.net/archives/27327
 
TOP
Home
News
Product
Application
Search