Complete knowledge of down jacket fabrics

Complete knowledge of down jacket fabrics

Down jacket fabric Knowledge Collection

Down jacket fabrics generally have the following types; light and thin ones are the popular trend, such as 380T nylon and the like. The square meter weight of the fabric is 35G is generally made of chemical fiber fabrics. There is also a type of memory fabric or anti-memory fabric that is also used. The square meter weight of the fabric is About 120G, relatively thick, and down, generally Duck (gray and white) down and goose down (gray and white), the ratio is generally 90/10, 80/20, 50/50. The front is the ratio of down, and the back is other fillings. The higher the ratio, the higher the quality. It’s good and has good warmth retention properties. However, general down jackets have a small amount of breathable wool,

“Transparent hair” I wonder what you mean It’s not the diamond down that I understand, it’s the down diamond running out through the gaps in the fabric. If so, it is usually the following two situations. The down is drilled through the stitching or stitching on the fabric. This situation is generally common. It can be prevented by the thickness of the needle in the clothing factory, but it can only be prevented, but it cannot be avoided. The other is to directly penetrate the fabric itself, which requires adjustment from the choice of fabric, such as calendering and coating on the back of the fabric. Generally, the effect of coating will be better.

Down jacket fabric Should be velvet-proof, windproof and breathable, with velvet-proof properties being particularly important. The anti-velvet performance depends on the yarn count density of the fabric used. At present, the feathers sold on the market are mainly nylon taffeta and TC cloth. Generally, the yarn count density is above 230T, and 250T is better. Below 230T, it is difficult to ensure that the fluff is not drilled. When identifying the fabric, first look at its thickness. Generally speaking, thin ones are considered sparse, and thick ones are dense; secondly, pat them with your hands. If there is fluff flying out, the density must be below 230T;

Again, hold a certain part of the clothes slightly Knead harder (of course, you must ask the salesperson for permission). If no tiny lint comes out, the density should be 250T; because the nylon thick fabric has a layer of paint, it is best to make it bright, smooth and even.

Disclaimer:

Disclaimer: Some of the texts, pictures, audios, and videos of some articles published on this site are from the Internet and do not represent the views of this site. The copyrights belong to the original authors. If you find that the information reproduced on this website infringes upon your rights, please contact us and we will change or delete it as soon as possible.

AA