Flame retardant clothing ironing process
Classification:
Flame retardant work clothes
1. It is often said that three-quarter seams and three-quarter ironing are required. Is it true that in addition to good shape, ironing is also very important for good clothing? People usually use clothing
Basic clothing styling techniques such as dividing lines and ironing and shaping can make high-end clothing present a perfect fit and beautiful styling effect. First of all, with
A sample with good dividing lines and dart modeling technology is the basis for successful shaping. However, it is difficult to perfectly solve the problem by relying solely on dividing lines and darts
The three-dimensional shape of the garment, and too many divisions can easily lead to skewed threads, disordered stripes, and chaotic patterns. At the same time, it increases the difficulty of sewing and reduces
FONT>
Low product quality. The pushing, returning, pulling out and ironing of clothing is an important technology for three-dimensional shaping and styling of clothing, especially for high-end garments.
The process technology that must be used in high-end clothing and fashion sewing. Pushing, returning, and pulling out for ironing mainly utilize the physical properties of stretchability of fabric fibers
, through humidification, hot pressing and shaping, and shaping heat treatment, the density and direction of the warp and weft tissue of the clothing fabric are changed to achieve a three-dimensional shape of the clothing
Purpose.
2. What does perm mean?
Hot ironing is a method of using the tip of the iron to iron certain narrow areas on clothing. This method is more effective when ironing buttons and certain accessoriesaround. When operating, lift the back of the iron so that the tip points toward the area to be ironed.
3. Knitted clothing is particularly easy to deform and is more difficult to iron than ordinary clothes. What should you pay attention to when ironing knitted clothing?
First of all, when ironing, the temperature, speed and contact time should be controlled according to the type and style of the gray fabric to prevent discoloration of the clothing or blurred printing. Use even force when ironing by hand to prevent pulling from affecting the size of the garment. Generally, for knitted products, an ironing board for shaping should be placed in the garment. The back of the garment is ironed first, and then the front. High-end products need to be ironed on three sides, that is, the ironing board is pulled out. Iron the back and front again.
4. The adhesive lining is always easy to loosen soon after ironing. What issues should you pay attention to when ironing?
Humidity, pressure and time are the three main conditions for pressing adhesive lining: the temperature, pressure and time during pressing mainly depend on it Regarding the types and properties of hot melt adhesives on adhesive linings, bonding temperature is the primary condition. The adhesive lining is ironed and pressed onto the clothing material, and it is requiredto be firmly adhered, non-peeling, and non-wrinkling. This not only depends on the matching and selection of the fusible lining and clothing materials, but also depends on the correct grasp of the melting point of the fusible lining, the bonding temperature and the pressing equipment (iron, The relationship between the bonding machine) and the pressing temperature. The general relationship between the three temperatures is: the stamping temperature of the appliance is higher than the bonding temperature, and the bonding temperature is higher than the melting temperature of the lining.
When starting to press the adhesive lining, the pressing temperature is lower than the melting point of the adhesive lining melt, and no adhesion occurs; when the temperature of the pressing surface of the pressing device reaches The melting point of the melt begins to bond; as the temperature and pressure increase, the bonding fastness increases rapidly; when the temperature of the hot stamping surface reaches the bonding liningWhen the temperature is close, the bonding fastness reaches the optimal value; if the temperature continues to rise beyond the bonding temperature range, the bonding fastness will no longer increase, and may even cause partial The hot melt adhesive seeps out of the cloth and no longer plays a bonding role. Instead, the bonding fastness decreases and the bonding quality is affected. Therefore, the hot-melt adhesive will not work properly. The temperature must be controlled within the bonding temperature range.
5. Can straight-waisted clothing such as men’s coats just need to be flat ironed?
Straight-waist clothing also needs to be straightened and ironed. The process of pushing, returning and pulling out ironing of men’s coats is roughly the same as that of pushing, returning and pulling out ironing of men’s suits. However, because the shape and structure of men’s coats are mostly straight-waisted, with no waist darts, relatively flat chests, and long seams, the requirements for body shape are not as high as for suits. , so the pressing, returning and pulling out ironing process is relatively simpler than that of a suit, but it also has its own characteristics. The technical key points are: the center of the chest of the front body is slightly opened, the armholes are ironed and rounded; the arc of the seam is ironed and smooth.��, push the fat to the chest, making the chest bulgein a ball-like shape; place the seam and the bottom straight, push the fat to the buttocks and abdomen ; The front body seam should be shrunk and ironed; since the hem seam is long, it should be ironed and shrunk to avoid sagging.
6. Pushing, returning, pulling and ironing of clothing is an important technology for three-dimensional shaping and styling of clothing, so how to perform returning, pulling and ironingPoron. To perform ironing, you must first master the characteristics of the clothing materials. The amount of ironing and pulling of different clothing materials must be appropriately operated according to their degree of stretch. Clothes with a large stretch rate are mainly pulled out, that is, the area that is pulled out is more and the area that is gathered is less; on the contrary, clothes with a small stretch rateare classified as Mainly, that is, the area to be pulled out is less and the area to be brought back is more; the pulled-out parts should be sprayed with water and humidified for ironing; according to the actual situation and ironing conditions of the human body The ironing process requires ironing; ironing from the reverse side; the ironing route must be correct and cannot be pushed or pulled at will; the ironing technique must becorrect, and both hands must cooperate tacitly; pay attention For the symmetry of the left and right pieces, usually two symmetrical pieces are overlapped and ironed. In addition, like other ironing, it is necessary to fully master the three elements of temperature, humidity and pressure.
7. When ironing trousers, it is difficult to iron the crotch, waist and hips. In what order should trousers be ironed? For trousers, the order of plastic surgeryis: iron each seam, bottom and upper part of the trousers from the reverse side – iron the upper part of the trousers from the front – iron the right trouser leg from the front All parts of the inseam – ironing the left trouser leg and inseamall parts – ironing all parts of the front, left and right sides.
8. Linen fabrics are particularly easy to wrinkle. How can we ensure that linen fabrics are smooth?
Line fabrics are easier to iron than cotton fabrics, but the pleats should not be pressed heavily to avoid brittle fibers; the washability of linen fabricsPoor, need to be ironed frequently to keep it smooth.
Henan Special TextileWeaving has 15 years of mature protective fabric production experience, 10 years of European and American sales experience, and specializes in the production of protective fabrics. Flame-retardant fabrics | Flame-retardant fabrics | Flame-retardant anti-static fabrics | Cotton flame-retardant fabrics | CVC flame-retardant fabrics | Cotton brocade flame-retardant fabrics | Oil-proof and waterproof fabrics | Acid- and alkali-proof fabrics | Anti-static fabrics | UV-proof fabrics | Mosquito-proof fabrics Manufacturers of fabrics and other functional fabrics, consultation phone number: Email:
AA
Disclaimer:
Disclaimer: Some of the texts, pictures, audios, and videos of some articles published on this site are from the Internet and do not represent the views of this site. The copyrights belong to the original authors. If you find that the information reproduced on this website infringes upon your rights, please contact us and we will change or delete it as soon as possible.
AA