The correct way to repair a tarp
In daily life, the tarpaulin will inevitably be damaged. How should we deal with it at this time?
tarpaulin glue
Cut two pieces of fabric according to the size of the hole, which should be larger than the hole. It is better to round the corners of the fabric so that it will not stretch easily. First patch one side of the tarpaulin. The cloth should be pasted with the uncoated PU side facing out, which is more wear-resistant. Apply glue evenly, especially around the edge, and then stick the prepared fabric on it. If you feel uneasy after sticking it, you can apply another layer of glue on the seam to be sure. It should be noted that the glue dries very quickly, in as little as ten seconds, so the glue must be applied quickly. Turn it over and stick another piece on the other side of the tarp to ensure firmness and prevent further glue opening, and you’re done.
Tarpa tape
1. First, wipe the surface of the damaged canvas clean. You can use sandpaper to lightly rub the damaged area, but you must Be careful not to wear off the waterproof layer
2. Measure the size of the damaged area, cut out a suitable tape segment and paste it on the damaged area.
3. Smooth the damaged areas of the tape and canvas so that the tape and canvas are completely bonded together.
4. Afterwards, let it sit for 1-2 hours to allow the glue on the tape to fully bond with the canvas.
|
Disclaimer:
Disclaimer: Some of the text, pictures, audio and video of some articles published on this site are from the Internet and do not represent the views of this site. The copyright belongs to the original author.�. If you find that the information reproduced on this website infringes upon your rights, please contact us and we will change or delete it as soon as possible.
AA
