Clothing Manufacturer_Clothing Factory clothing manufacturers News Fault analysis and troubleshooting during weaving

Fault analysis and troubleshooting during weaving



Fault analysis and troubleshooting during weaving 6. Uneven length measurement or short weft (Table 2-9) The phenomenon is shown in Figure 2-52. (1) Uneven length measurement: Poor…

Fault analysis and troubleshooting during weaving

6. Uneven length measurement or short weft (Table 2-9) The phenomenon is shown in Figure 2-52. (1) Uneven length measurement: Poor yarn supply package, unstable weft storage, insufficient conveying force or unstable length measurement. These phenomena will cause shutdown. (2) Short weft: serious unevenness in length measurement, accumulation of flying particles in the main nozzle, etc. This phenomenon will cause shutdown. (3) Short one turn: The weft yarn wound on the FDP drum is one less turn, causing the introduced weft yarn to be short. This phenomenon will cause the machine to stop.
AAAFGBHGYUTKU

Extendedreading:https://www.tpu-ptfe.com/post/7720.html
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedread

This article is from the Internet, does not represent 【https://www.clothing-manufacturers.net/】 position, reproduced please specify the source.https://www.clothing-manufacturers.net/archives/44406
 
TOP
Home
News
Product
Application
Search